This 0.045" thick polycarbonate stock sheet offers exceptional clarity and impact resistance, making it a robust solution for demanding heating and cooling applications.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.045" |
| Length | 19" |
| Width | 36" |
A proven choice for industrial professionals, this 0.045-inch thick polycarbonate sheet measures 19 inches by 36 inches. Engineered for superior impact strength and excellent optical clarity, it resists shattering and UV degradation, ensuring long-term performance in harsh environments. Its thermal insulation properties contribute to energy efficiency in HVAC systems. This material is ideal for fabrication into various components, including air diverters, fan shrouds, and protective barriers.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Cut the polycarbonate sheet to the required dimensions using a fine-tooth saw or laser cutter. 3. Secure the sheet using appropriate fasteners, ensuring not to over-tighten and cause stress fractures. Utilize pre-drilled holes with oversized washers for expansion.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Drilling holes too close to the edge without reinforcement. | Maintain a minimum distance of 1.5 times the hole diameter from the edge and use oversized washers. |
| Using abrasive cleaners that can scratch the polycarbonate surface. | Clean with mild soap and water, rinsing thoroughly. Avoid ammonia-based or abrasive cleaners. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: HVAC Air Diverters, Fan Shroud Covers, Protective Glazing for HVAC Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||