This premium brass stock sheet is engineered for superior performance in pulling and lifting applications. Its robust construction and material integrity ensure reliable operation in challenging environments.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.041" |
| Length | 12" |
| Width | 37" |
Trusted by engineers across multiple sectors, this brass stock sheet offers exceptional durability and corrosion resistance, crucial for demanding pulling and lifting operations. Measuring 0.041 inches in thickness, 12 inches in width, and 37 inches in length, it provides a substantial material base. Brass's inherent strength-to-weight ratio and non-sparking properties make it ideal for environments where safety and longevity are paramount. Its malleability also allows for custom fabrication to meet specific project requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of debris. 2. Accurately measure and cut the brass sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the fabricated brass component to the pulling or lifting apparatus using specified hardware.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to uneven edges. | Utilize carbide-tipped blades or abrasive cut-off wheels specifically designed for brass to ensure clean, precise cuts. |
| Over-tightening fasteners, causing stress concentrations. | Apply torque specifications as recommended by the relevant engineering drawings or industry standards to prevent material deformation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom fabricated sheaves for pulley systems, Reinforcement plates in winch mechanisms, Non-sparking components in hazardous environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||