This 0.038-inch thick carbon steel stock sheet, measuring 44 x 29 inches, is engineered for robust performance in pressure and temperature control systems. Its reliable material properties ensure durability and integrity in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.038" |
| Length | 44" |
| Width | 29" |
Trusted by engineers across multiple sectors, this carbon steel stock sheet offers a nominal thickness of 0.038 inches, a substantial length of 44 inches, and a width of 29 inches. Fabricated from high-grade carbon steel, it exhibits excellent tensile strength and thermal conductivity, making it suitable for fabricating components subject to moderate pressures and temperature fluctuations. Its formability and weldability facilitate custom design and integration into a wide array of pressure vessels, heat exchangers, and control system housings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting and shaping processes are completed according to design specifications. 2. Thoroughly clean all surfaces to remove contaminants before assembly. 3. Adhere to appropriate welding or fastening procedures for carbon steel to ensure structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding consumables for carbon steel, leading to poor joint strength. | Consult welding procedure specifications and utilize consumables specifically rated for the grade of carbon steel being used. |
| Inadequate surface preparation leading to weld porosity or contamination. | Grind or wire brush all weld areas to bare metal and degrease prior to welding. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Pressure vessel fabrication, Heat exchanger components, Industrial control panel enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||