This 0.032" carbon steel stock sheet is a versatile material for the heating and cooling industry. Its robust construction ensures durability and ease of fabrication for custom components and repairs.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.032" |
| Length | 14" |
| Width | 32" |
Engineered for reliability and performance, this carbon steel stock sheet boasts a nominal thickness of 0.032 inches, a length of 14 inches, and a width of 32 inches. Composed primarily of iron and carbon, its inherent strength and formability make it ideal for a wide array of HVAC applications. The material's thermal conductivity also contributes to its suitability in heat transfer components. Its precise dimensions allow for efficient material utilization in manufacturing processes, reducing waste and enhancing cost-effectiveness for ductwork, plenums, and other custom fabricated parts.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the required dimensions on the stock sheet. 2. Carefully cut the sheet to size using appropriate metal cutting tools. 3. Fabricate and install the cut piece according to the specific HVAC system design.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to jagged edges and potential material weakness. | Employ sharp, high-quality metal shears or a plasma cutter specifically designed for thin gauge steel to ensure clean, precise cuts. |
| Failing to account for material expansion and contraction in high-temperature applications. | Incorporate expansion joints or provide adequate clearance during installation to accommodate thermal movement. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: HVAC ductwork fabrication, Plenum construction, Custom heat exchanger components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||