This premium brass stock sheet, measuring 0.023" thick by 41" long and 13" wide, is engineered for demanding pressure and temperature control systems. Its inherent properties ensure reliability and longevity.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.023" |
| Length | 41" |
| Width | 13" |
Manufactured under strict quality controls, this brass stock sheet boasts a precise thickness of 0.023 inches, a length of 41 inches, and a width of 13 inches. Composed of a high-grade brass alloy, it exhibits excellent thermal conductivity, good corrosion resistance, and superior machinability, making it ideal for components within pressure regulators, control valves, and heat exchangers where precise material performance is critical. Its ductility allows for forming and shaping without compromising structural integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surface is clean and free of debris. 2. Carefully cut to desired dimensions using appropriate cutting tools. 3. Install according to system design specifications, ensuring proper sealing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard sheet metal tools for cutting without considering brass's ductility. | Utilize carbide-tipped or diamond-edged cutting tools designed for non-ferrous metals to prevent chipping and ensure clean cuts. |
| Insufficient support during bending or forming, leading to premature cracking. | Employ proper tooling and provide adequate support to prevent localized stress concentrations during any forming operations. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pressure regulator diaphragms, Valve components, Heat exchanger plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||