This high-quality carbon steel stock sheet, precisely measured at 0.019" thick, 32" in length, and 30" in width, is engineered for demanding pulling and lifting operations. Its robust construction ensures reliable performance in industrial environments.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.019" |
| Length | 32" |
| Width | 30" |
Manufactured under strict quality controls, this carbon steel stock sheet boasts a thickness of 0.019 inches, a length of 32 inches, and a width of 30 inches. Composed of high-grade carbon steel, it offers excellent tensile strength, durability, and resistance to deformation under load. The material's inherent toughness makes it suitable for applications requiring significant force transfer, ensuring long-term operational integrity. Its flat, uniform dimensions facilitate precise integration into various mechanical assemblies and fabrication processes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of debris. 2. Position the sheet according to the project design specifications. 3. Securely fasten the sheet using appropriate hardware and methods, ensuring load-bearing capacity is maintained.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improperly securing the sheet, leading to slippage or failure under load. | Utilize fasteners and mounting techniques rated for the anticipated tensile and shear forces. Consult engineering load charts for correct fastener selection and spacing. |
| Exposing the carbon steel to corrosive environments without protective coatings. | Apply appropriate rust inhibitors, paints, or plating if the application involves moisture, chemicals, or other corrosive agents to prevent premature degradation. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Reinforcement plates in lifting assemblies, Gussets and structural supports for pulling equipment, Custom fabrication for material handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||