This 0.017" thick Aluminum 6061 sheet, measuring 32" x 31", offers exceptional strength and corrosion resistance. It's a prime choice for demanding pressure and temperature control applications.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.017" |
| Length | 32" |
| Width | 31" |
Specified by design engineers worldwide, this Aluminum 6061 stock sheet in 0.017" thickness, 32" length, and 31" width, provides excellent corrosion resistance and good mechanical properties. Its alloy composition (Mg 0.8-1.2%, Si 0.4-0.8%, Cu 0.15-0.40%, Cr 0.04-0.35%, Zn 0.25%) makes it suitable for various pressure vessel components, heat exchangers, and thermal management systems where precise temperature regulation and structural integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare surfaces for bonding or welding, ensuring they are clean and free of contaminants. 2. Fabricate components according to design specifications, paying close attention to tolerances. 3. Implement appropriate joining techniques (e.g., TIG welding, brazing, or adhesive bonding) suitable for Aluminum 6061.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using improper welding filler metal for Aluminum 6061. | Consult welding procedure specifications to select the correct filler metal (e.g., 4043 or 5356) for optimal joint strength and ductility. |
| Insufficient surface preparation before joining. | Thoroughly degrease and mechanically clean the aluminum surfaces to remove oxides and contaminants, ensuring a strong bond or weld. |
A: This Aluminum 6061 Stock Sheet is manufactured from Aluminum 6061.
A: Pressure vessel components, Heat exchanger fabrication, Thermal management systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||