This 0.015-inch thick carbon steel stock sheet, measuring 21 by 23 inches, is a robust and cost-effective solution for demanding hydraulic system components. Engineered for durability and precise fabrication.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.015" |
| Length | 21" |
| Width | 23" |
A proven choice for industrial professionals, this 0.015" thick carbon steel stock sheet offers exceptional structural integrity and formability, crucial for hydraulic manifold fabrication, reservoir construction, and mounting plates. Its precise 21" x 23" dimensions minimize material waste and facilitate efficient machining. The inherent strength of carbon steel ensures resistance to moderate pressures and impacts, making it suitable for a wide range of hydraulic power units and fluid handling systems. Surface treatments can be applied to enhance corrosion resistance as required by the operating environment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the sheet thoroughly to remove any contaminants. 2. Precisely cut the sheet to the required component dimensions using appropriate tooling. 3. Fabricate and assemble the component according to hydraulic system design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower gauge steel for high-pressure hydraulic applications. | Always select carbon steel sheets with adequate thickness and tensile strength to withstand the operating pressures of the hydraulic system. |
| Failing to account for material expansion and contraction in temperature-sensitive hydraulic environments. | Consider the thermal expansion coefficient of carbon steel and incorporate design features that accommodate these changes. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Blocks, Hydraulic Reservoir Fabrication, Component Mounting Plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||