This 0.010-inch thick carbon steel stock sheet, measuring 34 inches by 37 inches, is engineered for demanding hydraulic applications, offering exceptional durability and formability for precision component manufacturing.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.010" |
| Length | 34" |
| Width | 37" |
Specified by design engineers worldwide, this carbon steel stock sheet offers a precisely calibrated 0.010-inch thickness, ensuring tight tolerances critical for hydraulic system integrity. Its robust carbon steel composition provides superior tensile strength and wear resistance, vital for components subjected to high pressures and dynamic loads. The 34-inch by 37-inch dimensions offer ample material for efficient cutting and fabrication of seals, gaskets, and structural elements within hydraulic manifolds, cylinders, and power units. Surface finish is optimized for compatibility with sealing compounds.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the carbon steel stock sheet thoroughly to remove any debris or contaminants. 2. Precisely cut the sheet to the required component dimensions using appropriate fabrication tools. 3. Form or stamp the material according to the design specifications for the intended hydraulic part.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong cutting tool, leading to burrs and imprecision. | Employ precision cutting tools specifically designed for thin gauge steel to ensure clean edges and dimensional accuracy. |
| Inadequate surface preparation before sealing or welding. | Always degrease and lightly abrade the surface to ensure optimal adhesion of sealants or proper weld penetration. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic seal fabrication, Manifold component stamping, Gasket production for fluid power systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||