Engineered for extreme chemical and thermal resistance, this Viton O-ring features a robust Titanium Grade 5 core. It ensures superior sealing integrity in demanding industrial applications.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 9.958" |
| Outside Diameter | 9.523" |
| Cross Section | 0.264" |
A high-performance industrial component, this Viton O-ring boasts exceptional chemical inertness and a wide operating temperature range, inherent to its fluoroelastomer composition. The integral Titanium Grade 5 (Ti-6Al-4V) core provides unparalleled strength, corrosion resistance, and a lightweight profile, making it ideal for aerospace, chemical processing, and high-pressure fluid systems where standard elastomers fail. The precise dimensions of 9.958" ID, 9.523" OD, and 0.264" cross-section ensure a precise fit and reliable seal against aggressive media and extreme operating conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect mating groove and O-ring for any debris or damage. 2. Lightly lubricate the O-ring and groove with a compatible lubricant. 3. Carefully install the O-ring into the groove, avoiding stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect lubricant, leading to material degradation. | Always use a lubricant specifically approved for Viton and the intended service fluid. |
| Overstretching the O-ring during installation, causing premature failure. | Ensure the O-ring is installed without excessive tension; it should fit snugly but not be distorted. |
A: This Industrial O-Ring, Viton is manufactured from Titanium Grade 5.
A: High-temperature chemical processing, Aerospace fluid handling systems, Oil and gas exploration equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||