This industrial O-ring features a Viton elastomer for exceptional chemical and thermal stability, housed within a robust Titanium Grade 5 structure. Engineered for demanding sealing applications where reliability is paramount.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 7.817" |
| Outside Diameter | 4.440" |
| Cross Section | 0.137" |
Built to exacting engineering tolerances, this Viton O-ring boasts an Inside Diameter of 7.817 inches, an Outside Diameter of 4.440 inches, and a Cross Section of 0.137 inches. The Viton material offers superior resistance to a wide range of aggressive chemicals, fuels, oils, and high temperatures up to 400°F (204°C), while the Titanium Grade 5 provides exceptional strength, corrosion resistance, and biocompatibility. This combination ensures reliable, long-lasting sealing performance in aerospace, chemical processing, and high-pressure hydraulic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect both the sealing groove and the O-ring for any foreign debris or damage. 2. Lubricate the O-ring and groove lightly with a compatible lubricant specified for Viton. 3. Carefully install the O-ring into the groove, ensuring it is seated evenly without twisting or stretching excessively.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible lubricants that degrade Viton. | Always consult compatibility charts and use lubricants specifically approved for Viton elastomers. |
| Overstretching or twisting the O-ring during installation, leading to premature failure. | Handle the O-ring with care, ensuring it is laid into the groove without undue stress. |
A: This Industrial O-Ring, Viton is manufactured from Titanium Grade 5.
A: Aerospace fluid and fuel systems, Chemical processing equipment, High-temperature hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||