This industrial Viton O-ring, crafted from Titanium Grade 5, delivers superior sealing performance. Its precise dimensions and robust material composition ensure reliability in extreme environments.
| Standard | ASTM A106 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 7.120" |
| Outside Diameter | 3.738" |
| Cross Section | 0.070" |
Built to exacting engineering tolerances, this Viton O-ring features an Inside Diameter of 7.120 inches, an Outside Diameter of 3.738 inches, and a Cross Section of 0.070 inches. The advanced Viton elastomer offers exceptional resistance to high temperatures, aggressive chemicals, and fuels, while the Titanium Grade 5 material provides superior corrosion resistance and mechanical strength. This combination makes it ideal for applications requiring robust sealing under severe operating conditions, including chemical processing, aerospace, and oil & gas exploration.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free from debris. 2. Carefully lubricate the O-ring with a compatible lubricant. 3. Gently install the O-ring into the groove, avoiding any pinching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible lubricants. | Always use lubricants specifically approved for Viton elastomers and the operating environment. |
| Overtightening fasteners around the seal. | Apply manufacturer-recommended torque specifications to prevent over-compression and premature seal failure. |
A: This Industrial O-Ring, Viton is manufactured from Titanium Grade 5.
A: Chemical Processing Equipment, Aerospace Fluid Systems, Oil and Gas Downhole Tools.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||