This industrial O-ring, crafted from advanced Viton with a Titanium Grade 5 construction, offers exceptional chemical and thermal resistance for demanding sealing applications in corrosive and high-temperature environments.
| Standard | DIN 933 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 6.309" |
| Outside Diameter | 9.473" |
| Cross Section | 0.096" |
Precision-manufactured to tight tolerances, this Viton O-ring features an Inside Diameter of 6.309 inches, an Outside Diameter of 9.473 inches, and a 0.096-inch cross-section. The utilization of Viton ensures outstanding resistance to a wide range of aggressive chemicals, fuels, and oils, while its inherent thermal stability allows operation across a broad temperature spectrum. The inclusion of Titanium Grade 5 in its construction further enhances mechanical strength, corrosion resistance, and biocompatibility, making it suitable for aerospace, chemical processing, and medical equipment applications where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean both the groove and the O-ring with a lint-free cloth and an approved solvent, ensuring no residual contaminants. 2. Apply a thin, even layer of compatible lubricant to the O-ring and the groove to facilitate smooth insertion and prevent damage during assembly. 3. Carefully install the O-ring into the designated groove, ensuring it is seated properly and free from any twists or kinks, verifying its position before closing the assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible cleaning solvents that can degrade Viton. | Always use solvents specifically recommended for Viton, such as isopropyl alcohol or mineral oil. |
| Over-lubricating the O-ring, which can lead to extrusion under pressure. | Apply only a thin, uniform coat of lubricant recommended for the specific application and material. |
| Forcing the O-ring into the groove, causing nicks or cuts. | Ensure the groove is properly sized and use gentle, consistent pressure during installation. |
A: This Industrial O-Ring, Viton is manufactured from Titanium Grade 5.
A: Aerospace fluid systems, Chemical processing equipment, High-temperature industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||