This industrial O-ring, crafted from premium Viton and featuring a Titanium Grade 5 core, offers unparalleled sealing integrity. Engineered for demanding applications, it ensures reliable performance under extreme conditions.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 2.414" |
| Outside Diameter | 5.030" |
| Cross Section | 0.165" |
Built to exacting engineering tolerances, this Viton O-ring boasts an inside diameter of 2.414 inches, an outside diameter of 5.030 inches, and a precise 0.165-inch cross-section. The inherent strength and corrosion resistance of Titanium Grade 5 provide a robust backbone, while the Viton elastomer ensures exceptional chemical resistance and a wide operating temperature range, making it suitable for aggressive media and high-pressure systems in aerospace, chemical processing, and automotive sectors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean both the groove and the O-ring to remove any debris or lubricant. 2. Carefully install the O-ring into the designated groove, ensuring it is seated without twisting. 3. Apply a light, compatible lubricant if necessary to facilitate installation and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening of fasteners leading to O-ring extrusion. | Adhere strictly to specified torque values for all mating components. |
| Using incompatible cleaning agents or lubricants that degrade the Viton. | Consult material compatibility charts and use only approved seal lubricants and cleaners. |
| Twisting or kinking the O-ring during installation. | Ensure the O-ring is properly seated in the groove without any twists before assembly. |
A: This Industrial O-Ring, Viton is manufactured from Titanium Grade 5.
A: Aerospace hydraulic systems, High-temperature chemical processing equipment, Automotive fuel systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||