This industrial O-ring, crafted from premium Viton and supported by a robust Titanium Grade 5 base, offers unparalleled sealing performance. Engineered for demanding applications requiring exceptional chemical and thermal resilience.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 0.815" |
| Outside Diameter | 6.571" |
| Cross Section | 0.140" |
Manufactured under strict quality controls, this industrial O-ring features a 0.815" inside diameter, 6.571" outside diameter, and a 0.140" cross-section. The Viton elastomer provides excellent resistance to a broad spectrum of chemicals, oils, and fuels, while maintaining its integrity across a wide temperature range. The Titanium Grade 5 base enhances structural integrity and corrosion resistance, making it suitable for high-pressure and aggressive media environments where standard elastomers may fail. Precision manufacturing ensures consistent sealing and longevity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Lubricate the O-ring lightly with a compatible lubricant. 3. Carefully install the O-ring into its designated groove, avoiding any twisting or stretching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply gentle pressure and ensure the O-ring seats evenly within the groove. |
| Incorrect O-ring size selection for the groove dimensions. | Verify all O-ring dimensions (ID, OD, CS) against the groove specifications before installation. |
| Contaminating the O-ring or mating surfaces with incompatible substances. | Always use clean tools and compatible lubricants; ensure the O-ring material is chemically compatible with the fluid being sealed. |
A: This Industrial O-Ring, Viton is manufactured from Titanium Grade 5.
A: Aerospace fuel systems, Chemical processing equipment, High-temperature hydraulic systems, Oil and gas exploration.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||