This industrial O-ring utilizes advanced Viton material within a Titanium Grade 5 housing for unparalleled chemical resistance and high-temperature performance. Engineered for critical sealing applications.
| Standard | ISO 9001 |
| Material | Titanium Grade 5 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 0.507" |
| Outside Diameter | 5.564" |
| Cross Section | 0.226" |
Manufactured under strict quality controls, this Viton O-ring boasts a 0.507" inside diameter, a 5.564" outside diameter, and a 0.226" cross-section. The Viton elastomer offers exceptional resistance to fuels, oils, solvents, and aggressive chemicals, while the Titanium Grade 5 casing provides superior strength, corrosion resistance, and biocompatibility, making it ideal for demanding aerospace, automotive, and chemical processing environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully compress the O-ring into its groove, avoiding any twisting or stretching. 3. Verify proper seating and seal integrity before pressurization.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-compression during installation. | Utilize groove dimensions that allow for nominal compression, typically 10-25% of the O-ring's cross-section. |
| Using incompatible cleaning agents. | Only use cleaning agents recommended for Viton and Titanium Grade 5 to prevent material degradation. |
A: This Industrial O-Ring, Viton is manufactured from Titanium Grade 5.
A: Aerospace fuel systems, Automotive high-temperature seals, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||