This industrial O-ring, crafted from premium Viton and Titanium Grade 5, offers exceptional sealing performance. Its precise dimensions ensure a secure fit in demanding environments, resisting aggressive chemicals and extreme temperatures.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 2.183" |
| Outside Diameter | 9.092" |
| Cross Section | 0.128" |
Manufactured under strict quality controls, this industrial O-ring boasts an Inside Diameter of 2.183 inches, an Outside Diameter of 9.092 inches, and a Cross Section of 0.128 inches. The Viton material provides excellent resistance to a wide range of chemicals, fuels, oils, and high temperatures (up to 400°F/204°C). The Titanium Grade 5 housing enhances structural integrity and corrosion resistance, making it ideal for aerospace, automotive, and chemical processing applications where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating grooves are clean and free of debris. 2. Carefully stretch the O-ring over the smaller diameter component or into the larger groove, avoiding excessive stretching or nicking. 3. Verify the O-ring is seated evenly and without twists before assembly completion.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during installation, causing extrusion or damage to the O-ring. | Use manufacturer-recommended torque specifications and ensure proper groove design to prevent O-ring extrusion. |
| Using incompatible lubricants that degrade Viton or Titanium. | Consult compatibility charts and use only approved lubricants for Viton and Titanium components. |
A: This Industrial O-Ring, Viton is manufactured from Titanium Grade 5.
A: Aerospace hydraulic systems, Automotive fuel injection systems, Chemical processing equipment seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||