Engineered for superior sealing in harsh industrial environments, this Viton O-ring offers exceptional resistance to chemicals, oils, and extreme temperatures, ensuring reliable performance and longevity.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 7.686" |
| Outside Diameter | 2.505" |
| Cross Section | 0.188" |
A high-performance industrial component, this Viton O-ring boasts precise dimensions: an Inside Diameter of 7.686 inches, an Outside Diameter of 2.505 inches, and a Cross Section of 0.188 inches. Constructed from premium Viton (FKM), it exhibits outstanding resilience against aggressive chemicals, high temperatures (up to 400°F/204°C), and petroleum-based fluids. This makes it ideal for applications where standard elastomers would degrade, providing a robust and dependable seal against leakage in critical systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, dry, and free from debris or sharp edges. 2. Carefully stretch the O-ring over the component, avoiding excessive force that could cause permanent deformation or nicks. 3. Position the O-ring squarely within its designated groove, ensuring full contact and no twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Gently flex and roll the O-ring into place, using minimal stretching to prevent damage and ensure a proper seal. |
| Installing on a dirty or damaged groove. | Thoroughly inspect and clean the groove, and if damaged, consider replacing the component or using a backup seal. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: Chemical processing equipment, Hydraulic and pneumatic systems, Automotive fuel systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||