Engineered for critical sealing applications, this Viton O-ring features a robust Grade 5 Titanium core. Its exceptional chemical and thermal resistance ensures reliable performance in demanding industrial environments.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 9.935" |
| Outside Diameter | 1.060" |
| Cross Section | 0.206" |
Manufactured under strict quality controls, this industrial O-ring boasts a precise inside diameter of 9.935 inches, an outside diameter of 1.060 inches, and a cross-section of 0.206 inches. The primary sealing element is constructed from premium Viton (FKM), renowned for its exceptional resistance to a wide range of aggressive chemicals, fuels, oils, and extreme temperatures (-20°F to +400°F). The integrated Grade 5 Titanium core (Ti-6Al-4V) provides superior mechanical strength, corrosion resistance, and dimensional stability, making it ideal for high-pressure and high-temperature applications where standard elastomers may fail. This combination ensures prolonged seal integrity and reduced maintenance in challenging operating conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free of debris. 2. Carefully inspect the O-ring for any signs of damage before installation. 3. Gently install the O-ring into its designated groove, avoiding stretching or twisting, and verify proper seating.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the gland assembly, causing excessive compression and premature seal failure. | Adhere to specified gland design and torque values to prevent over-compression and ensure optimal seal performance. |
| Using improper lubrication or installing the O-ring dry, leading to friction damage during assembly or operation. | Apply a thin layer of compatible lubricant (as specified for Viton and the application) to facilitate installation and reduce friction. |
A: This Industrial O-Ring, Viton is manufactured from Titanium Grade 5.
A: Aerospace fuel systems, Chemical processing equipment, High-temperature hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||