This industrial-grade Viton O-ring, constructed from robust Titanium Grade 5, provides exceptional sealing integrity in harsh environments. Its precise dimensions ensure a secure fit and long-lasting performance.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 8.288" |
| Outside Diameter | 3.001" |
| Cross Section | 0.077" |
Engineered for reliability and performance, this Viton O-ring boasts a precise inside diameter of 8.288 inches and an outside diameter of 3.001 inches, with a 0.077-inch cross-section. The use of Titanium Grade 5 as the sealing material imparts exceptional resistance to a wide range of chemicals, solvents, and elevated temperatures, making it ideal for aerospace, chemical processing, and high-pressure hydraulic systems. Its superior mechanical strength and corrosion resistance ensure consistent sealing performance under extreme operational conditions, extending equipment lifespan and minimizing maintenance downtime.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, dry, and free from any debris or sharp edges. 2. Carefully lubricate the O-ring and the groove with a compatible lubricant. 3. Gently install the O-ring into the groove, avoiding any stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong lubricant, which can degrade Viton. | Always consult the material compatibility chart and use a lubricant specifically approved for Viton and the intended operating environment. |
| Overtightening fasteners, which can crush the O-ring and compromise the seal. | Adhere to specified torque values and sequences to ensure even compression and prevent O-ring damage. |
A: This Industrial O-Ring, Viton is manufactured from Titanium Grade 5.
A: Aerospace fluid systems, Chemical processing equipment, High-temperature hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||