This high-performance Viton O-ring, featuring a durable carbon steel construction, provides exceptional sealing capabilities in extreme industrial conditions. Engineered for reliability and longevity.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 7.867" |
| Outside Diameter | 2.132" |
| Cross Section | 0.173" |
Designed for demanding industrial environments, this Viton O-ring offers superior resistance to heat, chemicals, and aggressive media. The robust carbon steel housing ensures structural integrity and extended service life in applications involving high pressures and temperatures. With an inside diameter of 7.867", an outside diameter of 2.132", and a cross-section of 0.173", this seal is engineered to prevent leakage in critical fluid and gas systems, offering dependable performance where standard elastomers fail.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free from burrs or damage. 2. Carefully place the O-ring into the groove, avoiding stretching or twisting. 3. Apply a light coating of compatible lubricant if recommended for the specific application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, which can crush the O-ring and compromise the seal. | Follow specified torque values for all fasteners to ensure proper compression without damaging the O-ring. |
| Using incorrect lubrication or no lubrication, leading to tearing or premature wear. | Consult application-specific guidelines for compatible lubricants and apply sparingly to facilitate installation and prevent damage. |
A: This Industrial O-Ring, Viton is manufactured from Carbon Steel.
A: High-temperature chemical processing, Hydraulic and pneumatic systems, Automotive fuel and emission control.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||