This industrial Viton O-ring, housed within a durable carbon steel casing, provides exceptional sealing performance. Engineered for resilience and longevity in critical applications.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 2.523" |
| Outside Diameter | 7.702" |
| Cross Section | 0.110" |
A high-performance industrial component, this Viton O-ring features a precise Inside Diameter of 2.523 inches and an Outside Diameter of 7.702 inches, with a 0.110-inch cross-section. The Viton material offers superior resistance to a wide range of chemicals, high temperatures, and aggressive media, making it ideal for sealing in extreme environments. The carbon steel housing ensures structural integrity and compatibility with demanding industrial systems, preventing extrusion and enhancing sealing reliability.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean, dry, and free of debris. 2. Carefully position the O-ring within its designated groove, avoiding any stretching or twisting. 3. Assemble components, applying even pressure to ensure proper seating and seal engagement.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation, leading to premature failure. | Install the O-ring without excessive elongation, allowing it to fit naturally into the groove. |
| Using incompatible cleaning agents that can degrade the Viton material. | Consult the material compatibility chart for Viton and use only approved cleaning solutions. |
A: This Industrial O-Ring, Viton is manufactured from Carbon Steel.
A: Hydraulic systems, Pneumatic actuators, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||