This industrial Viton O-ring, integrated with a brass fitting, offers exceptional sealing integrity. Designed for high-temperature and chemically aggressive environments, it ensures reliable performance in critical systems.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 7.701" |
| Outside Diameter | 10.089" |
| Cross Section | 0.235" |
Specified by design engineers worldwide, this Viton O-ring provides superior resistance to heat, chemicals, and extreme pressures. Its precise dimensions – 7.701" inside diameter, 10.089" outside diameter, and a 0.235" cross-section – ensure a precise fit and effective seal within its intended housing. The inherent properties of Viton, such as low gas permeability and excellent compression set resistance, make it an ideal choice for applications requiring long-term, dependable sealing solutions in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully compress the O-ring into the designated groove, avoiding excessive force or twisting. 3. Verify proper seating and compression before system pressurization.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply gradual, even pressure to seat the O-ring, ensuring it conforms to the groove without distortion. |
| Incorrect O-ring size for the application, resulting in leakage or premature failure. | Always confirm the specified O-ring dimensions (ID, OD, CS) against the groove dimensions and system requirements. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Automotive fuel systems, Chemical processing equipment, Aerospace hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||