Engineered for superior sealing in harsh industrial settings, this Viton O-ring features a brass housing for enhanced durability and chemical resistance. Precisely manufactured to 0.728" ID, 7.766" OD, and 0.190" cross section for reliable performance.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 0.728" |
| Outside Diameter | 7.766" |
| Cross Section | 0.190" |
Designed for demanding industrial environments, this O-ring utilizes a high-performance Viton elastomer, renowned for its exceptional resistance to aggressive chemicals, high temperatures, and extreme pressure fluctuations. The integrated brass housing provides superior structural integrity and corrosion resistance, making it ideal for applications involving abrasive media or corrosive fluids. With a precise inside diameter of 0.728 inches, an outside diameter of 7.766 inches, and a robust cross-section of 0.190 inches, this O-ring ensures a secure and leak-free seal in critical hydraulic, pneumatic, and fluid transfer systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free from debris. 2. Lightly lubricate the O-ring and the groove with a compatible lubricant. 3. Carefully install the O-ring into the designated groove, avoiding any stretching or twisting. 4. Verify proper seating and compression of the O-ring before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong lubricant | Always consult compatibility charts for lubricants suitable for Viton and the specific operating environment. |
| Overstretching the O-ring during installation | Install the O-ring gently, allowing it to seat naturally into the groove without excessive force. |
| Installing on dirty or damaged surfaces | Thoroughly clean and inspect mating surfaces for any nicks, burrs, or contamination that could compromise the seal. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Hydraulic Systems, Chemical Processing Equipment, High-Temperature Fluid Transfer.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||