This industrial Viton O-ring, integrated with a brass fitting, offers exceptional sealing capabilities. Engineered for harsh environments, it ensures long-term reliability and resistance to aggressive media.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 0.161" |
| Outside Diameter | 7.133" |
| Cross Section | 0.166" |
Engineered for reliability and performance, this Viton O-ring features a 0.161-inch inside diameter, a 7.133-inch outside diameter, and a 0.166-inch cross-section. The Viton (FKM) material provides superior resistance to high temperatures, aggressive chemicals, fuels, and oils, making it ideal for demanding industrial environments. The brass fitting ensures robust connection and compatibility with brass systems. Its precise dimensions guarantee a secure and leak-proof seal under pressure and thermal cycling, critical for hydraulic, pneumatic, and fluid handling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove and shaft are clean and free of debris. 2. Lightly lubricate the O-ring with a compatible lubricant to prevent damage during installation. 3. Carefully install the O-ring into the groove, ensuring it is seated evenly without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to cuts or nicks. | Apply gentle, even pressure and use appropriate installation tools if necessary. |
| Incorrect O-ring size selection for the groove dimensions. | Verify all dimensions (ID, OD, CS) against the groove specifications before installation. |
| Using incompatible lubricants that degrade Viton material. | Consult a material compatibility chart for lubricants suitable for Viton. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Chemical processing equipment, Automotive fuel systems, Hydraulic and pneumatic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||