This Viton O-Ring, featuring a brass construction for enhanced sealing properties, is engineered for critical applications requiring superior chemical and temperature resistance.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 9.782" |
| Outside Diameter | 9.483" |
| Cross Section | 0.094" |
A high-performance industrial component, this Viton O-Ring boasts precise dimensions: an Inside Diameter of 9.782 inches, an Outside Diameter of 9.483 inches, and a Cross Section of 0.094 inches. The Viton material provides exceptional resistance to a broad spectrum of chemicals, fuels, oils, and extreme temperatures, making it ideal for harsh environments. The brass housing offers added structural integrity and corrosion resistance, ensuring long-term reliability in demanding sealing applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, dry, and free of debris. 2. Carefully position the O-ring into the groove, avoiding excessive stretching or twisting. 3. Apply a light, compatible lubricant if necessary to facilitate installation and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during installation, leading to compression set and premature failure. | Install with minimal required force, ensuring a snug but not distorted fit within the groove. |
| Using incompatible lubricants or cleaning agents that degrade the Viton material. | Consult material compatibility charts for appropriate lubricants and cleaning solutions. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Chemical Processing Equipment, Automotive Fuel Systems, Aerospace Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||