This high-performance Viton O-ring, featuring a brass fitting, is engineered for demanding industrial environments. Its superior chemical and thermal resistance ensures reliable sealing in critical applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 9.745" |
| Outside Diameter | 7.978" |
| Cross Section | 0.176" |
Purpose-built for heavy-duty applications, this industrial O-ring boasts an inside diameter of 9.745 inches, an outside diameter of 7.978 inches, and a cross-section of 0.176 inches. The Viton material provides exceptional resistance to aggressive chemicals, oils, fuels, and extreme temperatures, making it ideal for use in aerospace, automotive, and chemical processing. The integrated brass fitting offers robust connection capabilities and corrosion resistance in challenging operational settings, ensuring a secure and long-lasting seal.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, free of debris, and properly lubricated with a compatible lubricant. 2. Carefully install the O-ring into the groove, avoiding stretching or twisting. 3. Assemble the mating components, ensuring even pressure is applied to seat the O-ring without pinching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Gently roll or slide the O-ring into the groove, minimizing elongation. |
| Using an incompatible lubricant that degrades Viton. | Consult a chemical compatibility chart and use only lubricants specifically approved for Viton. |
| Installing into a dirty or damaged groove. | Thoroughly clean and inspect the groove for any imperfections before O-ring installation. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Chemical Processing Equipment, Automotive Fuel Systems, Aerospace Hydraulic Systems, High-Temperature Seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||