This industrial O-ring, crafted from premium Viton and featuring a brass fitting, ensures exceptional sealing performance. Its precise dimensions guarantee reliable operation in critical applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 9.307" |
| Outside Diameter | 6.276" |
| Cross Section | 0.194" |
Manufactured under strict quality controls, this Viton O-ring boasts an Inside Diameter of 9.307 inches, an Outside Diameter of 6.276 inches, and a Cross Section of 0.194 inches. The Viton material offers excellent resistance to high temperatures, aggressive chemicals, and fuels, making it ideal for harsh industrial environments. The brass component ensures robust material compatibility and durability in specific corrosive or electrically conductive applications. This combination provides a dependable, long-lasting seal.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both mating grooves and the O-ring thoroughly. Ensure no debris or residue remains. 2. Lubricate the O-ring and the groove with a compatible lubricant. Avoid over-lubrication. 3. Carefully install the O-ring into the groove, ensuring it is seated correctly and not twisted. Avoid using excessive force.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong lubricant that degrades Viton or brass. | Consult the material compatibility chart for appropriate lubricants. Silicone-based or specific fluorinated greases are often recommended for Viton. |
| Forcing the O-ring into a tight groove, causing extrusion or tearing. | Ensure the groove dimensions are within tolerance and use a suitable installation tool if necessary. The O-ring should install with moderate hand pressure. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Chemical processing equipment, Automotive fuel systems, Aerospace hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||