This industrial Viton O-ring, featuring a brass fitting, delivers exceptional sealing performance in aggressive chemical and high-temperature applications. Engineered for reliability, it ensures leak-proof operation in critical systems.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 9.037" |
| Outside Diameter | 5.883" |
| Cross Section | 0.141" |
Specified by design engineers worldwide, this Viton O-ring, with a nominal inside diameter of 9.037 inches and an outside diameter of 5.883 inches, boasts a precise cross-section of 0.141 inches. The FKM (Viton) elastomer offers superior resistance to a broad spectrum of chemicals, fuels, oils, and extreme temperatures ranging from -20°F to +400°F (-29°C to +204°C). The integrated brass fitting provides robust structural integrity and compatibility in fluid handling systems, making it suitable for static and dynamic sealing applications where material degradation is a concern.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, free of debris, and free of sharp edges. 2. Carefully install the O-ring into the groove, avoiding stretching or twisting. 3. Apply a thin layer of compatible lubricant if necessary for easier assembly and to prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the gland, which can extrude or damage the O-ring. | Ensure the gland closure is within specified torque limits to prevent over-compression. |
| Using incompatible lubricants that can degrade the Viton material. | Consult a material compatibility chart and use only approved silicone or PTFE-based lubricants. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Chemical Processing Equipment, Automotive Fuel Systems, Aerospace Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||