Engineered for superior sealing in harsh environments, this Viton O-ring with a Brass gland offers exceptional chemical and temperature resistance. Its robust construction ensures long-term reliability in critical industrial applications.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 8.256" |
| Outside Diameter | 1.690" |
| Cross Section | 0.252" |
Built to exacting engineering tolerances, this industrial O-ring features a precise inside diameter of 8.256 inches, an outside diameter of 1.690 inches, and a cross-section of 0.252 inches. The Viton (FKM) elastomer provides excellent resistance to high temperatures, aggressive chemicals, fuels, and oils, making it suitable for demanding applications where standard elastomers would fail. The integrated Brass gland ensures robust support and sealing integrity within its designated housing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the gland surfaces are clean, dry, and free from debris. 2. Carefully position the O-ring within the gland, avoiding stretching or twisting. 3. Apply a light lubricant compatible with Viton if necessary to facilitate seating and prevent damage during assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the gland, leading to O-ring extrusion or damage. | Tighten fasteners to the manufacturer's specified torque or until a snug fit is achieved, allowing the O-ring to compress without excessive force. |
| Using incompatible lubricants that degrade the Viton material. | Consult the O-ring manufacturer's compatibility chart for approved lubricants specifically designed for Viton and the operational environment. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Chemical processing equipment, High-temperature hydraulic systems, Fuel and oil handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||