This industrial-grade Viton O-ring, featuring brass as its accommodating material, offers exceptional chemical and heat resistance for robust sealing solutions in demanding operational conditions.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 0.150" |
| Outside Diameter | 6.791" |
| Cross Section | 0.125" |
A proven choice for industrial professionals, this Viton O-ring excels in environments requiring superior chemical inertness and high-temperature stability. The brass construction ensures compatibility and longevity in specific fluid or gaseous mediums, resisting degradation from corrosive substances and maintaining seal integrity up to 200°C (392°F). With an inside diameter of 0.150 inches, an outside diameter of 6.791 inches, and a cross-section of 0.125 inches, this component is engineered for precise fitment and reliable performance in critical sealing applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free of debris. 2. Carefully install the O-ring into the groove, avoiding any stretching or twisting. 3. Ensure the O-ring is properly seated and compressed for optimal sealing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Gently flex and roll the O-ring into the groove, using a lubricant if necessary, to prevent excessive strain. |
| Installing the O-ring into a contaminated or damaged groove. | Thoroughly inspect and clean the sealing surface before installation to ensure a proper seal and prevent premature failure. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Chemical processing equipment, High-temperature fluid systems, Automotive fuel and oil systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||