Engineered for superior sealing in harsh industrial settings, this Viton O-ring offers exceptional chemical and temperature resistance. Its robust construction ensures reliable performance under pressure.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 6.585" |
| Outside Diameter | 4.756" |
| Cross Section | 0.183" |
Designed for demanding industrial environments, this Viton O-ring is constructed with a high-performance fluoroelastomer (FKM) compound, offering excellent resistance to aggressive chemicals, high temperatures (up to 446°F/230°C), and ozone. The brass metal retainer ensures robust structural integrity and compatibility in specific corrosive applications. With a precise inside diameter of 6.585 inches, an outside diameter of 4.756 inches, and a cross-section of 0.183 inches, this O-ring is manufactured to exacting tolerances for leak-proof sealing in critical hydraulic, pneumatic, and fluid power systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free from debris. 2. Lightly lubricate the O-ring with a compatible lubricant. 3. Carefully install the O-ring into the designated groove, avoiding any pinching or stretching. 4. Verify proper seating and compression.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong lubricant. | Always use a lubricant compatible with both the O-ring material (Viton) and the system's fluid. |
| Overstretching or pinching the O-ring during installation. | Handle the O-ring with care and ensure it is properly seated in the groove without excessive force. |
| Installing into a dirty or damaged groove. | Thoroughly clean and inspect the sealing groove for any damage or foreign material before installation. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Chemical processing equipment, High-temperature fluid power systems, Automotive fuel and oil seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||