This industrial O-ring features a durable Viton elastomer for superior chemical and temperature resistance, housed within a precision-machined brass fitting. Engineered for reliable sealing in harsh environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 6.255" |
| Outside Diameter | 9.490" |
| Cross Section | 0.161" |
Precision-manufactured to tight tolerances, this Viton O-ring boasts an Inside Diameter of 6.255", an Outside Diameter of 9.490", and a Cross Section of 0.161". The Viton (FKM) material offers exceptional resistance to a broad range of chemicals, oils, fuels, and high temperatures (up to 400°F / 204°C), making it ideal for demanding hydraulic, pneumatic, and automotive systems. The integral brass housing ensures robust mechanical support and compatibility with metallic fluid pathways, preventing material extrusion and enhancing sealing integrity under pressure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure both mating surfaces are clean, dry, and free from debris. 2. Carefully place the O-ring into its designated groove, ensuring it is seated evenly without twisting. 3. Apply a thin, compatible lubricant if necessary to facilitate assembly and prevent damage during installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong lubricant, which can degrade Viton. | Always use lubricants specifically recommended for Viton or FKM elastomers. |
| Forcing the O-ring into place, leading to cuts or tears. | If resistance is met, re-inspect the groove and the O-ring for damage or obstructions. Gentle pressure and proper alignment are key. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Hydraulic Systems, Automotive Fuel Systems, Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||