This industrial-grade Viton O-ring, featuring a brass material construction, provides exceptional sealing performance. Engineered for durability and resistance to harsh chemicals and extreme temperatures.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 4.908" |
| Outside Diameter | 8.504" |
| Cross Section | 0.181" |
A proven choice for industrial professionals, this Viton O-ring boasts a precise inside diameter of 4.908 inches, an outside diameter of 8.504 inches, and a cross-section of 0.181 inches. The advanced Viton (FKM) elastomer offers superior resistance to a broad spectrum of chemicals, fuels, oils, and high temperatures up to 400°F (204°C), making it ideal for demanding hydraulic, pneumatic, and fluid power systems. The brass material compatibility ensures robustness in corrosive environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Lightly lubricate the O-ring with a compatible lubricant. 3. Carefully insert the O-ring into its designated groove, avoiding any twisting or stretching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect lubricant leading to material degradation. | Always use a lubricant specifically rated for Viton (FKM) and compatible with the fluid being sealed. |
| Stretching or twisting the O-ring during installation. | Handle the O-ring with care and ensure it seats properly without deformation. Roll it into place if necessary. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Hydraulic Systems, Pneumatic Actuators, Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||