This industrial-grade Viton O-ring, housed within a durable brass fitting, offers exceptional sealing performance in challenging operational conditions. Engineered for reliability and longevity.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 4.823" |
| Outside Diameter | 3.685" |
| Cross Section | 0.168" |
A proven choice for industrial professionals, this Viton O-ring boasts an inside diameter of 4.823 inches, an outside diameter of 3.685 inches, and a cross-section of 0.168 inches. The Viton (FKM) material provides superior resistance to a wide range of chemicals, oils, fuels, and extreme temperatures, maintaining its sealing integrity from -20°F to +400°F (-29°C to +204°C). The brass housing ensures robust mechanical support and corrosion resistance in various industrial fluid power systems and chemical processing equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean and free of debris. 2. Carefully lubricate the O-ring with a compatible lubricant if recommended for the application. 3. Install the O-ring into the designated groove, ensuring it is seated evenly without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Installing a dry O-ring, leading to tearing or premature wear. | Always lubricate the O-ring with a compatible lubricant before installation. |
| Overstretching or twisting the O-ring during installation. | Install the O-ring carefully, ensuring it sits flat in the groove without excessive stretching. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Hydraulic and Pneumatic Systems, Chemical Processing Equipment, Automotive Fuel Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||