This industrial O-ring features a durable Viton elastomer for exceptional chemical and temperature resistance. The brass fitting ensures robust connection integrity in aggressive media and high-pressure systems.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 3.406" |
| Outside Diameter | 9.615" |
| Cross Section | 0.208" |
Designed for demanding industrial environments, this O-ring boasts a 3.406" inside diameter, a 9.615" outside diameter, and a 0.208" cross-section. The Viton material offers excellent resistance to a wide range of chemicals, fuels, oils, and high temperatures up to 400°F (204°C), making it ideal for hydraulic systems, chemical processing, and automotive applications where seal integrity is paramount. The integrated brass component provides enhanced corrosion resistance and a secure mechanical interface within the assembly.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free of debris. 2. Carefully position the O-ring into its designated groove, avoiding any twisting or stretching. 3. Apply a light, compatible lubricant if necessary for ease of assembly and to prevent damage during installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the fitting, which can deform or cut the O-ring. | Tighten fittings to the manufacturer's recommended torque specifications. |
| Using incompatible lubricants that can degrade the Viton material. | Consult a compatibility chart or the O-ring manufacturer for approved lubricants. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Chemical Processing Equipment, Hydraulic and Pneumatic Systems, Automotive Fuel and Oil Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||