This industrial O-ring features a robust Viton elastomer for exceptional chemical and thermal resistance, housed within a brass carrier for enhanced structural integrity and conductivity. Engineered for critical sealing applications.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 3.053" |
| Outside Diameter | 4.740" |
| Cross Section | 0.273" |
A high-performance industrial component, this Viton O-ring is designed for rigorous operational demands. It boasts a precise 3.053" inside diameter, a 4.740" outside diameter, and a 0.273" cross-section, ensuring a tight and reliable seal. The Viton material offers outstanding resistance to a broad spectrum of aggressive chemicals, oils, fuels, and high temperatures up to 200°C (392°F), while the brass housing provides excellent electrical conductivity and resistance to certain corrosive media. Ideal for applications requiring both robust sealing and material compatibility with specific environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove and sealing surfaces are clean, dry, and free from debris. 2. Carefully inspect the O-ring for any nicks, cuts, or imperfections. 3. Gently install the O-ring into its designated groove, avoiding stretching or twisting, ensuring a uniform fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply gentle, even pressure, and utilize appropriate installation tools if necessary to prevent stretching or tearing. |
| Incorrect groove preparation, leaving contaminants that compromise the seal. | Thoroughly clean and inspect the groove and mating surfaces before installation to remove any debris or foreign particles. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Chemical Processing Equipment, Automotive Fuel Systems, Aerospace Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||