This industrial Viton O-ring, featuring a brass construction, provides exceptional sealing performance. Engineered for resilience, it ensures reliable operation in demanding chemical and thermal conditions.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 2.472" |
| Outside Diameter | 7.821" |
| Cross Section | 0.197" |
Precision-manufactured to tight tolerances, this Viton O-ring boasts an Inside Diameter (ID) of 2.472 inches, an Outside Diameter (OD) of 7.821 inches, and a Cross Section (CS) of 0.197 inches. The Viton (FKM) material offers outstanding resistance to a wide range of aggressive chemicals, oils, fuels, and extreme temperatures, making it ideal for high-pressure and corrosive environments. The brass component ensures compatibility in specific fluid systems and provides structural integrity. This combination guarantees long-term sealing efficacy and durability in critical industrial applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure both mating surfaces and the O-ring are clean and free from debris. 2. Lightly lubricate the O-ring with a compatible lubricant to facilitate installation and prevent damage. 3. Carefully install the O-ring into its designated groove, ensuring it is seated correctly and not twisted.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring tearing or permanent deformation. | Apply gentle, consistent pressure. Use appropriate tools if necessary, ensuring they do not damage the O-ring. |
| Improper lubrication or using an incompatible lubricant, which can degrade the O-ring material or hinder proper sealing. | Always use a lubricant recommended for Viton (FKM) and the specific application environment. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Chemical Processing Equipment, Automotive Fuel Systems, Hydraulic and Pneumatic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||