This industrial Viton O-ring, integrated with a brass component, provides superior sealing integrity. Its robust design ensures reliable performance in aggressive chemical environments and high-temperature applications.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 2.241" |
| Outside Diameter | 10.212" |
| Cross Section | 0.156" |
Engineered for reliability and performance, this Viton O-ring boasts an inside diameter of 2.241 inches and an outside diameter of 10.212 inches, with a 0.156-inch cross-section. The fluoroelastomer (FKM) material offers exceptional resistance to a wide range of chemicals, oils, fuels, and extreme temperatures, making it ideal for demanding industrial sectors such as chemical processing, automotive, and aerospace. The integrated brass fitting ensures secure and precise assembly in critical fluid power and hydraulic systems, preventing leaks under pressure and vibration.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove and the O-ring are clean and free of debris. 2. Lightly lubricate the O-ring with a compatible lubricant, if recommended for the specific application. 3. Carefully install the O-ring into the groove, avoiding any stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong lubricant, which can degrade the Viton material. | Always use lubricants specifically approved for Viton and the operating environment. |
| Over-stretching or twisting the O-ring during installation, leading to premature failure. | Install the O-ring carefully without excessive force or deformation, ensuring it seats properly in the groove. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Chemical processing equipment, Automotive fuel systems, Aerospace hydraulic components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||