This industrial Viton O-ring, featuring a brass material specification, provides exceptional sealing performance in demanding environments. Its robust construction ensures reliable containment of fluids and gases.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 2.093" |
| Outside Diameter | 6.550" |
| Cross Section | 0.083" |
Trusted by engineers across multiple sectors, this industrial O-ring is precision-engineered from Viton (FKM) for superior chemical and thermal resistance, making it suitable for aggressive media and elevated temperatures up to 200°C (392°F). The O-ring boasts an inside diameter of 2.093 inches, an outside diameter of 6.550 inches, and a critical cross-section of 0.083 inches. The brass material specification for the housing ensures compatibility and durability in specific assembly requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free of any debris or sharp edges. 2. Carefully lubricate the O-ring and the groove with a compatible lubricant to prevent damage during installation. 3. Gently install the O-ring into the groove, avoiding stretching or twisting, ensuring it sits flush within the groove.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during assembly, leading to O-ring extrusion or damage. | Tighten fasteners to the manufacturer's specified torque values to prevent over-compression. |
| Using incompatible lubricants or cleaning agents that degrade the Viton material. | Always consult a chemical compatibility chart and use only lubricants recommended for Viton and the specific application. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Chemical Processing Equipment, Automotive Fuel Systems, Aerospace Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||