This industrial-grade Viton O-ring, paired with a brass fitting, offers superior sealing in aggressive environments. Engineered for exceptional chemical and heat resistance, ensuring reliable performance in critical systems.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 1.939" |
| Outside Diameter | 8.247" |
| Cross Section | 0.204" |
Trusted by engineers across multiple sectors, this Viton O-ring, featuring a brass fitting, boasts exceptional resilience. With an Inside Diameter of 1.939", an Outside Diameter of 8.247", and a precise 0.204" cross-section, it is designed for high-pressure and high-temperature applications. Viton's inherent resistance to a broad spectrum of chemicals, fuels, and oils, combined with its low compression set, makes this seal ideal for aerospace, automotive, and chemical processing industries where reliability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free of debris. 2. Carefully lubricate the O-ring and the groove with a compatible lubricant. 3. Gently install the O-ring, avoiding any twisting or stretching, ensuring it sits flush within the groove.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong lubricant, which can degrade Viton. | Always consult material compatibility charts and use only lubricants specified for Viton and the operating environment. |
| Over-stretching or twisting the O-ring during installation, leading to premature failure. | Handle the O-ring with care, using appropriate tools if necessary, and ensure it is installed without distortion. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Chemical processing equipment, Automotive fuel systems, Aerospace hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||