This industrial O-ring, constructed from durable Viton and featuring a brass fitting, offers superior sealing performance in challenging applications. Its precise dimensions ensure a reliable, leak-free seal.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 1.408" |
| Outside Diameter | 3.460" |
| Cross Section | 0.077" |
Designed for demanding industrial environments, this Viton O-ring ensures exceptional chemical resistance and thermal stability, operating effectively across a wide temperature range. The robust brass fitting provides secure mounting and conductivity where required. With an inside diameter of 1.408 inches, an outside diameter of 3.460 inches, and a precise cross-section of 0.077 inches, this assembly guarantees a tight, dependable seal against aggressive media and extreme pressures, making it suitable for hydraulic systems, chemical processing, and automotive applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean mating surfaces thoroughly to remove any debris or old sealant. 2. Carefully place the O-ring into its designated groove, ensuring it is not twisted or stretched. 3. Assemble components, applying even pressure to compress the O-ring and create a seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, which can deform the O-ring and compromise the seal. | Tighten fasteners to the manufacturer's recommended torque specifications. |
| Using incorrect lubrication or no lubrication, leading to tearing or difficulty during installation. | Apply a compatible lubricant, such as silicone grease or a PTFE-based lubricant, specifically designed for the O-ring material and application. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Chemical Processing Equipment, Hydraulic and Pneumatic Systems, Automotive Fuel and Engine Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||