Engineered for superior sealing performance in aggressive environments. This Viton O-ring, featuring a brass composition, offers exceptional chemical resistance and durability for critical industrial applications.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 0.819" |
| Outside Diameter | 3.415" |
| Cross Section | 0.255" |
A high-performance industrial component, this Viton O-ring boasts precise dimensions of 0.819" inside diameter, 3.415" outside diameter, and a 0.255" cross-section. The fluoroelastomer (Viton) material provides exceptional resistance to high temperatures, a wide range of chemicals, fuels, and oils, making it suitable for demanding applications where reliability is paramount. The brass component ensures compatibility in specific corrosive media or electrical conductivity requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free from burrs or damage. 2. Carefully inspect the O-ring for any defects before installation. 3. Gently stretch or compress the O-ring as necessary to fit into the groove, avoiding excessive force or sharp tools.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using damaged or contaminated O-rings. | Thoroughly inspect O-rings for nicks, cuts, or debris before installation. Ensure the sealing groove is meticulously cleaned. |
| Overstretching or twisting the O-ring during installation. | Handle the O-ring with care. Use appropriate tools if needed, and avoid excessive stretching or twisting, which can compromise the seal. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Chemical processing equipment seals, Automotive fuel systems, High-temperature hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||