This industrial O-ring features premium Viton material for superior chemical and heat resistance, housed within a brass fitting. Its precise dimensions ensure a secure, leak-proof seal in critical fluid and gas systems.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 0.166" |
| Outside Diameter | 10.235" |
| Cross Section | 0.251" |
Engineered for reliability and performance, this Viton O-ring (FKM) is designed to withstand extreme temperatures (-20°F to +400°F) and aggressive chemicals. The brass housing offers excellent corrosion resistance and durability. With an inside diameter of 0.166 inches, an outside diameter of 10.235 inches, and a 0.251-inch cross-section, this seal provides robust containment for a wide range of industrial fluids, fuels, and lubricants in high-pressure environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free from burrs. 2. Carefully place the O-ring into its designated groove or recess, avoiding stretching or twisting. 3. Apply a thin layer of compatible lubricant to the O-ring and sealing surface for easier assembly and to prevent damage during initial compression.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Gently seat the O-ring into the groove without excessive tension. Use a lubricant to facilitate smooth insertion. |
| Using the wrong type of lubricant or sealant. | Consult the O-ring material compatibility chart and the system's fluid type to select an appropriate, non-degrading lubricant or sealant. |
A: This Industrial O-Ring, Viton is manufactured from Brass.
A: Hydraulic systems, Fuel and oil handling, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||