Engineered for superior chemical and temperature resistance, this Viton O-ring features a robust Aluminum 6061 core. Ideal for critical sealing applications where reliability is paramount.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 1.649" |
| Outside Diameter | 2.743" |
| Cross Section | 0.086" |
Manufactured under strict quality controls, this industrial O-ring boasts a precise Inside Diameter of 1.649 inches and an Outside Diameter of 2.743 inches, with a consistent 0.086-inch cross-section. The Viton elastomer provides exceptional resistance to a wide range of aggressive chemicals, fuels, oils, and extreme temperatures (-20°C to +200°C), while the embedded Aluminum 6061 core offers enhanced structural integrity and dimensional stability, preventing extrusion in high-pressure systems. This combination ensures reliable sealing in demanding hydraulic, pneumatic, and automotive environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the groove and mating surfaces for cleanliness and absence of damage. 2. Lightly lubricate the O-ring and groove with a compatible lubricant. 3. Carefully install the O-ring into the groove, ensuring it is seated without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, potentially nicking or tearing the O-ring. | Apply a compatible lubricant and use a plastic or wooden tool for installation if necessary, avoiding sharp metal instruments. |
| Installing the O-ring in a twisted or deformed state, leading to premature failure. | Ensure the O-ring is properly seated and lies flat within the groove without any signs of twisting before assembly. |
A: This Industrial O-Ring, Viton is manufactured from Aluminum 6061.
A: High-pressure hydraulic systems, Automotive fuel and oil systems, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||