This high-performance Viton O-ring, constructed with Aluminum 6061, is designed for critical sealing in severe industrial environments. Its exceptional material properties ensure reliable performance under extreme conditions.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 9.972" |
| Outside Diameter | 7.991" |
| Cross Section | 0.259" |
Purpose-built for heavy-duty applications, this Viton O-ring boasts a precise inside diameter of 9.972 inches, an outside diameter of 7.991 inches, and a robust 0.259-inch cross-section. The Aluminum 6061 housing provides excellent structural integrity and thermal conductivity, while the Viton elastomer offers superior resistance to a wide range of aggressive chemicals, high temperatures (up to 450°F/232°C), and harsh operating fluids. This combination makes it ideal for demanding hydraulic systems, chemical processing equipment, and automotive engine seals.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, free of debris, and properly dimensioned for the O-ring. 2. Lubricate the O-ring and the sealing groove with a compatible lubricant to prevent damage during installation and ensure a proper seal. 3. Carefully install the O-ring into the groove, avoiding any twisting or stretching. Ensure it sits flush and evenly within the groove.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the gland, which can cause O-ring extrusion or pinching. | Adhere to specified gland design and torque values. Consult engineering drawings for precise assembly instructions. |
| Using a lubricant incompatible with the Viton material or the application fluids. | Always verify lubricant compatibility with both the O-ring material and all process media. Refer to material compatibility charts. |
A: This Industrial O-Ring, Viton is manufactured from Aluminum 6061.
A: Chemical Processing Equipment, High-Temperature Hydraulic Systems, Automotive Engine Seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||