Engineered for extreme environments, this Viton O-ring ensures reliable sealing in high-pressure and corrosive industrial settings. Its superior material properties guarantee longevity and performance where others fail.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 9.505" |
| Outside Diameter | 10.907" |
| Cross Section | 0.162" |
Purpose-built for heavy-duty applications, this industrial O-ring features a precise Inside Diameter of 9.505 inches, an Outside Diameter of 10.907 inches, and a Cross Section of 0.162 inches. Constructed from high-performance Viton (FKM), it exhibits exceptional resistance to a wide range of chemicals, fuels, oils, and high temperatures up to 400°F (204°C). Its inherent resilience and low compression set make it ideal for critical sealing in hydraulic systems, automotive applications, chemical processing, and aerospace components, providing a dependable barrier against leaks under demanding operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the groove is clean, dry, and free from burrs or debris. 2. Lightly lubricate the O-ring with a compatible lubricant if recommended for the specific application. 3. Carefully install the O-ring into the groove, avoiding excessive stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong lubricant, leading to material degradation. | Always consult the O-ring manufacturer's compatibility chart for appropriate lubricants. |
| Over-stretching or twisting the O-ring during installation, causing premature failure. | Install the O-ring gently, ensuring it seats evenly within the groove without deformation. |
A: This Industrial O-Ring, Viton is manufactured from Polycarbonate.
A: Hydraulic Systems, Chemical Processing Equipment, Automotive Fuel Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||