This high-performance Viton O-ring, constructed with a robust carbon steel core, offers exceptional sealing capabilities in demanding industrial applications requiring superior chemical and temperature resistance.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 6.182" |
| Outside Diameter | 6.783" |
| Cross Section | 0.169" |
Built to exacting engineering tolerances, this industrial O-ring features an inside diameter of 6.182 inches, an outside diameter of 6.783 inches, and a precise cross-section of 0.169 inches. The Viton (Fluoroelastomer) material provides outstanding resistance to a wide range of chemicals, oils, fuels, and elevated temperatures up to 400°F (204°C), making it ideal for critical sealing applications where reliability is paramount. The carbon steel core enhances structural integrity and dimensional stability under high pressure and stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove and O-ring are clean and free of debris. 2. Apply a thin layer of compatible lubricant to the O-ring and groove. 3. Carefully install the O-ring into the groove, avoiding twisting or stretching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect lubricant or no lubricant. | Always use a lubricant compatible with Viton and the operating environment to prevent premature degradation and ease installation. |
| Over-stretching or twisting the O-ring during installation. | Install the O-ring by carefully working it into the groove to maintain its cross-sectional integrity and prevent leaks. |
A: This Industrial O-Ring, Viton is manufactured from Carbon Steel.
A: Chemical processing equipment, Hydraulic and pneumatic systems, Automotive fuel systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||