Engineered for demanding industrial environments, this Viton O-ring provides superior sealing performance. Its robust carbon steel construction and precise dimensions ensure reliable operation under extreme conditions.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 9.191" |
| Outside Diameter | 9.562" |
| Cross Section | 0.074" |
Purpose-built for heavy-duty applications, this Industrial O-Ring features a nominal Inside Diameter of 9.191 inches, an Outside Diameter of 9.562 inches, and a Cross Section of 0.074 inches. The Viton material offers exceptional resistance to high temperatures, aggressive chemicals, and harsh operating environments, making it ideal for critical sealing points in hydraulic systems, chemical processing, and automotive applications where standard elastomers would degrade. The carbon steel construction provides structural integrity and compatibility with a wide range of mating components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free of any debris or sharp edges. 2. Carefully inspect the O-ring for any nicks, cuts, or imperfections prior to installation. 3. Lubricate the O-ring with a compatible lubricant to facilitate insertion and prevent damage, then gently install it into the designated groove, avoiding overstretching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Installing on a dirty or damaged groove. | Thoroughly clean and inspect the sealing groove for any imperfections before installation. |
| Overstretching the O-ring during installation. | Use a lubricant and install the O-ring without excessive stretching, ensuring it sits properly in the groove. |
A: This Industrial O-Ring, Viton is manufactured from Carbon Steel.
A: Hydraulic and Pneumatic Systems, Chemical Processing Equipment, Automotive Engine Seals, High-Temperature Applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||