This industrial Viton O-ring provides robust sealing solutions in harsh environments. Engineered for exceptional chemical and thermal resilience, it ensures reliable performance in critical fluid and gas containment systems.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 1.865" |
| Outside Diameter | 7.640" |
| Cross Section | 0.124" |
Built to exacting engineering tolerances, this Viton O-ring boasts an Inside Diameter of 1.865 inches, an Outside Diameter of 7.640 inches, and a precise Cross Section of 0.124 inches. Crafted from high-grade Viton (FKM), it exhibits outstanding resistance to a wide array of chemicals, fuels, oils, and solvents, alongside excellent performance across a broad temperature range (-20°F to +400°F). This material's inherent low compression set guarantees sustained sealing force over extended operational periods, making it ideal for static and dynamic applications requiring long-term integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating grooves and surfaces are clean, dry, and free from burrs or debris. 2. Lubricate the O-ring and groove lightly with a compatible lubricant. 3. Carefully install the O-ring, avoiding twisting or stretching beyond its elastic limit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply gentle, consistent pressure and utilize appropriate tooling if necessary to prevent tearing or nicking. |
| Incorrect lubricant selection, causing material degradation. | Always consult a chemical compatibility chart to select a lubricant that is compatible with Viton and the specific media being sealed. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: Automotive Fuel Systems, Chemical Processing Equipment, Aerospace Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||